Hammer the dowels/wedges into every hole that has a dowel, using the hollow punch supplied.
At this stage you can still dismantle your structure! To
keep it temporary leave out the
wedges.
The third row
is the same as the
first row. The fourth is
the same as the second, and so on...
Don't put
dowels in
these holes for
straight runs -
they are for corners.
The end of one BlocX should coincide with the middle of the BlocX below.
Fit the second row
of BlocX onto
the first row of dowels, tapping to ensure no gaps.
Lay out the BlocX
on the ground
next to the wall to
see where the dowels match up.
Tip: Use "mother's little helper"
Assemble the wedges into the dowels.